A gas furnace is the most efficient way to heat your Denver, NC home. Gas furnaces have long lifespans, and many people find gas heating to be more comfortable than other types of home heating systems. A key part of this type of heating system is the furnace gas valve. The following tips will help you be aware of these symptoms of a malfunctioning gas valve so that you can stay safe and comfortable all winter long in Charlotte, NC.
A malfunctioning furnace gas valve may impede your furnace’s ability to perform the combustion process. If the valve isn’t allowing enough gas to get into the combustion chamber, your furnace won’t be able to transfer heat through the heat exchanger, into the air handler, and throughout your home. The result will be room-temperature air blowing from your home’s vents.
Inadequate gas flow from the valve may cause your furnace to stay on for an extended period of time. Without enough gas for the combustion process, the furnace will never make enough heat to reach the temperature setting on your thermostat. The thermostat will continue communicating to the furnace to stay on. Eventually, this could cause the blower motor to overheat. If your furnace doesn’t turn off and it’s blowing room-temperature air, it’s best to turn it off and call for professional HVAC repairs.
A failing furnace gas valve could result in a gas leak in your home. The gas may build up and suddenly release somewhere other than the sealed combustion chamber. If too much gas is released from the valve, the excess may seep out of the combustion chamber and mix with the air you breathe. Excess gas also impedes the combustion process. Your home’s carbon monoxide alarm may sound. This is an emergency and requires urgent repairs, explains the Department of Energy.
For more information about the symptoms of a malfunctioning furnace gas valve, take a look at Lakeside Heating & Air Conditioning’s professional HVAC repairs, or contact us today.
A gas furnace relies entirely on natural gas or propane to provide heat. In some cases, however, there can be a sufficient amount of natural gas or propane in the tank, but it still doesn’t reach the ignitor to continue the heating process.
This problem happens when your furnace system has a poor gas valve. Consider three signs to know if your furnace gas valve is at fault.
The gas valve supplies the natural gas or fuel from the propane tank to the ignitor. The gas valve regulates the gas flow. It enables the igniter to light the pilot flame that heats the heat exchanger for hot airflow. The furnace will not work if the gas valve is in poor condition. Three signs indicate whether your gas valve is in good condition or not. Continue reading for more information.
For furnace installation in Fairfax or Arlington, VA, schedule service with AVS Heating & Air Conditioning.
If your furnace suddenly shuts down after a few years of furnace installation, the culprit is probably a bad gas valve. If the gas valve is faulty, it will stop supplying the fuel. Then, the ignitor will not work, and the furnace system will stop blowing hot air.
Another common reason for complete system failure can be low voltage or faulty flame sensors. You should also ensure whether your furnace gas valve is open or not. Insufficient fuel can also cause furnace shutdown.
If there is sufficient fuel and the condition of the flame sensor is also intact, the gas valve needs to be repaired to fix the failure.
The leaking fuel indicates leakage through poor odors. If you smell gas leakage, you should immediately open all the windows and doors for ventilation. Then, exit your house and contact our technician for furnace evaluation.
Gas leakage imposes many safety hazards. If there is any spark from candles or any other ignition sources, gas leakage can cause a fire hazard. Leaking gas, if inhaled, gives rise to multiple health issues. One must never avoid leaking fuel.
If your furnace leaks gas, the gas valve is faulty and should be repaired on time. Ignored gas valve repair can also damage the entire heating unit.
If there is any water pipe near your furnace, it may lead to water entering the gas valve and deteriorating its condition. The excessive moisture nearby can also lead to rusting. If there are cracks in the water pipe, the cracks will cause the flooded condition.
The gas furnace valve repair can cost around $200 to $1000 depending on its condition. The cost also depends on whether it requires repair or replacement. You can get this service at a fair price at AVS Heating & Air Conditioning. We provide both heating repair and furnace installation in Fairfax and Arlington, VA. Schedule service with us for superior services.
Previous
Comments
Please Join Us to post.
0